Width:500-2000mm normal size1000 1219 1220 1240 1250 1500 2000mm Length:1000-6000mm normal size 2438 2440 3000 6000mm
TISCO BAOSTEEL LISCO BAOXIN ZPSS JISCO
Mill /raw or slit edge
ThicknessXWidthXLengthX7.93(304) per sheet
cold rolled hot rolled
30% T/T in advance,the balance before shipment 30% T/T in advance,the balance L/C at sight 100% L/C at sight
1.Export sea worthy package + water proof paper + wooden pallet 2.Max Loading 25mt for each 20GP container 3.Safe loading and fixing Professional Teams
Within 7-10 working days after received 30%T/T of deposit or L/C original
FOB SHANGHAI CFR&CIF your port
Mill Test Certificate is supplied with shipment
1.Construction field, shipping building industry
1. Stretch good, toughness, but the price is more expensive;
2. Cold rolling processing surface without oxide skin, good quality;
3. Cold rolling is generally used in the production of strip, the rolling speed is high;
4. Cold rolling than the thickness of the high precision. Mechanical properties, surface and so on in the hot rolling;
5. Cold-rolled steel plate due to a certain degree of work hardening, low toughness, but can achieve better yield ratio, used for cold-formed spring and other parts;
6 cold plate yield point closer to the tensile strength, so the use of risk in the process of no predictability, when the load exceeds the allowable load prone to accidents
7. The surface of the cold rolling plate without plating is gray.
8 cold rolling plate plating surface smoothness is higher than the hot plate.
2B Cold Rolled, Annealed, Pickled And Passivated
This is produced as 2D finish, but a final light rolling using hightly polished rolls gives the surface a smooth, reflective, grey sheen. This is the most widely used surface finish in use today and forms the basis for most polished and brushed finishes.
This finish is produced by polishing with at least a 320 grit belt or wheel finish. Care should be taken in making sure all surface defects are removed. The part is sisal buffed and then color buffed to achieve a mirror finish. The quality of this finish is dependent on the quality of the metal being polished. Some alloys of steel and aluminum cannot be brought to a mirror finish, Casting that have slag or pits will also be difficult.
Hairline/Machanically Polished And Brushed Finishes
The number of additional finishing processes can be minimised by selecting, as the starting point, the closest mill finish to the desired end result. Applied finishes will have a deirect bearing on the surface appearance and the environmental performance of the material, and should be careffly chossen.
Package Information:Sino Steel are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might otherwise be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
What are your advantages?
1) Fast delivery time.
2) High quality, quantity is with preferential treatment.
3) We can process to different finish you request.
4) Main distributor and gold supplier.
5) 800 Tons/Month, high production capability will short your wait time.
6) Tisco, Jisco, SPSS, QPSS, Baoxin, Baosteel and other famous brand.
7) Good quality with reasonable price.
8) Buyer's Specification Accepted.
9) Experienced R & D Department.